 |
Phone：+86 0537-3330928
Fax：+86 0537-3330928
Email ：info@darrenco.cn
|
|
|
| BY-03A-1 Cold Sealing Additive |
1. This is light green solid. Beside stable sealing quality, there are some characteristics as follows:
(1) Excellent anti-impurities ions property. Running water can be used to prepare bath liquid.
(2) wide process scope: Operation temperature 20-35℃,provided with extending time properly, it has still excellent sealing effect at 15℃.
(3) Easy operation: bath liquid has strong buffer capacity to acid or alkaline. It is not frequently needed to adjust pH value. The consumption of Fluorine and Nickel can achieve balance basically.
(4) Suitable to thick film it can be used to cold sealing of thick anodic coating (20-30℃) on aluminum profile;
(5) Strong inhibition to "smut"
(6) Clear anodic coating on aluminum profile can be kept after sealing. |
|
1. Bath Composition (For make-up): |
|
|
BY-03A
Nickel acetate
Deioned Water |
2.5-3.0g/L
2.5-3.0g/L
balance |
|
2. Processing Parameters: |
|
|
Ni2+content
F- content
Temperature
pH value |
0.8-1.3g/L
0.3-0.7g/L
20-35℃
5.5-6.6 |
|
3. Bath Maintenance: |
(1) In order to decrease contamination to bath, aluminum profile must be washed carefully before sealing. The pH in rinsing is not lower than 4.5;
(2) during the normal produce, analyse the concentrations of Ni2+ , F- and pH value daily.
a. Keep the concentration of Ni2+ at 0.9-1.3g/L,not than 0.8g/L and the concentration of F+ at 0.3-0.6g/L, not than 0.3g/L;
b. Control pH value at 5.5-6.5.If pH value is not met to process requirement, adjust pH value with dilute acetic acid (or dilute HF acid), dilute NaOH (or dilute ammonia water) |
|
|
|
|
|
|
